Two months ago I bought a Thinkpad X1 Yoga Gen3 [1]. I’m still very happy with it, the screen is a great improvement over the FullHD screen on my previous Thinkpad. I have yet to discover what’s the best resolution to have on a laptop if price isn’t an issue, but it’s at least 1440p for a 14″ display, that’s 210DPI. The latest Thinkpad X1 Yoga is the 7th gen and has up to 3840*2400 resolution on the internal display for 323DPI. Apple apparently uses the term “Retina Display” to mean something in the range of 250DPI to 300DPI, so my current laptop is below “Retina” while the most expensive new Thinkpads are above it.
I did some tests on external displays and found that this Thinkpad along with a Dell Latitude of the same form factor and about the same age can only handle one 4K display on a Thunderbolt dock and one on HDMI. On Reddit u/Carlioso1234 pointed out this specs page which says it supports a maximum of 3 displays including the built in TFT [2]. The Thunderbolt/USB-C connection has a maximum resolution of 5120*2880 and the HDMI port has a maximum of 4K. The latest Yoga can support four displays total which means 2*5K over Thunderbolt and one 4K over HDMI. It would be nice if someone made a 8000*2880 ultrawide display that looked like 2*5K displays when connected via Thunderbolt. It would also be nice if someone made a 32″ 5K display, currently they all seem to be 27″ and I’ve found that even for 4K resolution 32″ is better than 27″.
With the typical configuration of Linux and the BIOS the Yoga Gen3 will have it’s touch screen stop working after suspend. I have confirmed this for stylus use but as the finger-touch functionality is broken I couldn’t confirm that. On r/thinkpad u/p9k told me how to fix this problem [3]. I had to set the BIOS to Win 10 Sleep aka Hybrid sleep and then put the following in /etc/systemd/system/thinkpad-wakeup-config.service :
# https://www.reddit.com/r/thinkpad/comments/1blpy20/comment/kw7se2l/?context=3 [Unit] Description=Workarounds for sleep wakeup source for Thinkpad X1 Yoga 3 After=sysinit.target After=systemd-modules-load.service [Service] Type=oneshot ExecStart=/bin/sh -c "echo 'enabled' > /sys/devices/platform/i8042/serio0/power/wakeup" ExecStart=/bin/sh -c "echo 'enabled' > /sys/devices/platform/i8042/serio1/power/wakeup" ExecStart=/bin/sh -c "echo 'LID' > /proc/acpi/wakeup" [Install] WantedBy=multi-user.target
Now it works fine, for stylus at least. I still get kernel error messages like the following which don’t seem to cause problems:
wacom 0003:056A:5146.0005: wacom_idleprox_timeout: tool appears to be hung in-prox. forcing it out.
When it wasn’t working I got the above but also kernel error messages like:
wacom 0003:056A:5146.0005: wacom_wac_queue_insert: kfifo has filled, starting to drop events
This change affected the way suspend etc operate. Now when I connect the laptop to power it will leave suspend mode. I’ve configured KDE to suspend when the lid is closed and there’s no monitor connected.
Leave a Reply
You must be logged in to post a comment.